メインコンテンツにスキップ

MacBook Pro (13 Zoll, Ende 2012, Retina Display) Kühlkörper-Einheit austauschen

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての16個のガイドに反映されます。

英語
ドイツ語

手順 2を翻訳中

手順2
MacBook Pro 13" Retina Display Late 2012 Heat Sink Assembly Replacement: 手順 0、 2の画像 1 MacBook Pro 13" Retina Display Late 2012 Heat Sink Assembly Replacement: 手順 0、 2の画像 2
  • Lift and remove the heat sink up off the logic board assembly.

  • When reinstalling the heat sink, be sure to apply a new layer of thermal paste. If you have never applied thermal paste before, we have a guide that makes it easy.

Hebe den Kühlkörper von der Logic Board Einheit weg und entferne ihn.

Vergiss nicht, beim Einbau des Kühlkörpers eine neue Schicht Wärmeleitpaste aufzutragen. Wenn du das noch nie gemacht hast, hilft dir unsere Anleitung dabei.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります