メインコンテンツにスキップ

Huawei P20の背面ガラス交換

注意:あなたはさきほど閲覧しているガイドの前提となるページを編集しています。あなたが行った変更は、この手順を含むガイド全体に影響を与えます。

英語
日本語

手順 4を翻訳中

手順4
Huawei P20 Rear Glass Replacement: 手順 0、 3の画像 1 Huawei P20 Rear Glass Replacement: 手順 0、 3の画像 2 Huawei P20 Rear Glass Replacement: 手順 0、 3の画像 3
  • Insert a third opening pick at the bottom left corner.

  • In the next few steps whilst cutting around the power button and rear camera make sure you only use the tip of the opening pick to avoid cutting the cable, smearing the lens or damaging the camera.

  • Start to slide the tip of the opening pick from the bottom left corner along the side of the phone to cut the adhesive.

  • Leave the opening pick in its place at the top left corner to prevent the adhesive from resealing.

左下隅に3本目のオープニングピックを差し込みます。

電源ボタンと背面カメラの周囲を切開しながら、次の手順では、ケーブルを切断したり、レンズを汚したり、カメラを傷つけたりしないように、オープニングピックの先端だけを使用するようにしてください。

オープニングピックの先端を左下からスマートフォンの側面に沿ってスライドさせ、接着剤をカットします。

接着剤の再密着を防ぐため、オープニングピックは左上隅の所定の位置に残します。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります