手順 1を翻訳中
手順1
-
Use a plastic opening pick to pop up the small black tab of the touchscreen ZIF connector.
-
Use the tweezers to remove the orange ribbon cable from the connector and peel the ribbon from the backboard, as it's secured with a light adhesive.
[* red] Use a plastic opening pick to pop up the small black tab of the touchscreen ZIF connector. | |
[* icon_note] The black tab should not pop out, but rather hinge upwards. It will release the ribbon cable from its connector. | |
- | [* black] Use the tweezers to remove the orange ribbon cable from the connector and peel the ribbon from the backboard, as it's secured with a light adhesive. |
+ | [* black] Use the [product|IF145-020|tweezers] to remove the orange ribbon cable from the connector and peel the ribbon from the backboard, as it's secured with a light adhesive. |
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。