修理を始めるには コミュニティ ストア

Google Pixel 3 Vervanging van de achterste behuizing

注意：あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての10個のガイドに反映されます。

ガイドに戻る
英語
オランダ語
前の手順

手順 11を翻訳中

手順11
Google Pixel 3 Back Cover Replacement, Remove the back cover: 手順 0、 3の画像 1 Google Pixel 3 Back Cover Replacement, Remove the back cover: 手順 0、 3の画像 2 Google Pixel 3 Back Cover Replacement, Remove the back cover: 手順 0、 3の画像 3
Remove the back cover

  • Remove the back cover.

  • Before you install a replacement back cover, be sure to remove all adhesive residue from the phone frame. Use an opening tool to scrape and high concentration isopropyl alcohol to clean the surface.

  • If you are re-using the back cover, be sure to clean off any adhesive, and apply new back cover adhesive.

  • If you are installing a replacement back cover, be sure to compare it with the original part. Transfer any remaining parts (such as the flash diffuser) over to your replacement part.

  • Follow this guide to correctly apply new back cover adhesive.

ここに翻訳を挿入する

Verwijder de achterste behuizing.

Zorg dat je all lijmresten uit het frame van de telefoon verwijdert alvorens je de nieuwe achterste behuizing installeert. Gebruik een openingstool en wat isopropyl alcohol om het oppervlak schoon te maken.

Zorg dat je, als je de achterste behuizing hergebruikt, alle lijmresten eerst verwijdert en daarna nieuwe kleefstrips of tape aanbrengt om je oude behuizing te bevestigen.

Vergelijk je nieuwe achterkant, voordat je deze bevestigt, met de originele behuizing en zet de benodigde onderdelen (zoals de flitsverdeler) mee over naar je nieuwe onderdeel.

+[title] Remove the back cover
[* black] Remove the back cover.
[* icon_reminder] Before you install a replacement back cover, be sure to remove all adhesive residue from the phone frame. Use an opening tool to scrape and high concentration isopropyl alcohol to clean the surface.
[* icon_reminder] If you are re-using the back cover, be sure to clean off any adhesive, and apply new back cover adhesive.
-[* icon_reminder] If you are installing a replacement back cover, be sure compare it with the original part. Transfer any remaining parts (such as the flash diffuser) over to your replacement part.
+[* icon_reminder] If you are installing a replacement back cover, be sure to compare it with the original part. Transfer any remaining parts (such as the flash diffuser) over to your replacement part.
+[* icon_reminder] Follow [guide|155011|this guide|new_window=true] to correctly apply new back cover adhesive.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。