メインコンテンツにスキップ

Huawei Honor 9 Vervanging van de batterij

ご注意:あなたは前提となるガイドを編集しています。あなたが行なう変更は、この手順を含むガイド全体に反映されます。

英語
オランダ語

手順 1を翻訳中

手順1
Huawei Honor 9 Battery Replacement, Remove the Battery: 手順 0、 3の画像 1 Huawei Honor 9 Battery Replacement, Remove the Battery: 手順 0、 3の画像 2 Huawei Honor 9 Battery Replacement, Remove the Battery: 手順 0、 3の画像 3
Remove the Battery
  • Apply an iOpener to the center of the display, to loosen the adhesive beneath the battery.

  • The adhesive beneath the battery is very strong. You might need to repeat this process during the removal procedure several times. If heat does not work you can apply isopropyl alcohol (90+%) to the corners of the battery and let it penetrate the adhesive for several minutes before continuing.

  • The flex cables under the battery are laid out as seen in the image. Try to avoid prying in the marked areas to prevent damaging the cables.

  • Display flex cable

  • Interconnect flex cable

Leg een iOpener op het midden van het scherm om zo de lijm onder de batterij te verzachten.

De lijm onder de batterij is erg sterk. Het kan zijn dat je dit proces een aantal keer moet herhalen. Als warmte niet voldoende werkt, kun je ervoor kiezen om isopropyl alcohol (90+%) onder de hoeken van de batterij aan te brengen. Geef deze een aantal minuten de tijd om in te trekken voordat je verder gaat.

Op de foto kun je zien hoe de flexkabels onder de batterij zijn gelegd. Probeer deze gebieden te vermijden om te voorkomen dat je deze kabels beschadigt.

Flexkabel van het scherm

Interconnectflexkabel

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります