メインコンテンツにスキップ

Remplacement de la batterie du Huawei Honor 9

ご注意:あなたは前提となるガイドを編集しています。あなたが行なう変更は、この手順を含むガイド全体に反映されます。

英語
フランス語

手順 1を翻訳中

手順1
Huawei Honor 9 Battery Replacement, Remove the Battery: 手順 0、 3の画像 1 Huawei Honor 9 Battery Replacement, Remove the Battery: 手順 0、 3の画像 2 Huawei Honor 9 Battery Replacement, Remove the Battery: 手順 0、 3の画像 3
Remove the Battery
  • Apply an iOpener to the center of the display, to loosen the adhesive beneath the battery.

  • The adhesive beneath the battery is very strong. You might need to repeat this process during the removal procedure several times. If heat does not work you can apply isopropyl alcohol (90+%) to the corners of the battery and let it penetrate the adhesive for several minutes before continuing.

  • The flex cables under the battery are laid out as seen in the image. Try to avoid prying in the marked areas to prevent damaging the cables.

  • Display flex cable

  • Interconnect flex cable

Posez un iOpener au milieu de l'écran pour ramollir l'adhésif sous la batterie.

Cet adhésif est très tenace. Vous devrez peut-être répéter cette manipulation à plusieurs reprises lors de la procédure de retrait. Si chauffer ne suffit pas, vous pouvez déposer quelques gouttes d'alcool isopropylique (concentré à 90 % ou plus) dans les coins de la batterie et le laisser pénétrer pendant quelques minutes avant de continuer.

Les nappes sous la batterie se répartissent comme sur l'image. Évitez de faire levier dans les zones entourées en couleur pour ne pas endommager les nappes :

La nappe de l'écran

La nappe d'interconnexion

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります