メインコンテンツにスキップ

MacBook Pro 13" Retina Display Late 2012 ディスプレイアセンブリの交換

注意:あなたはさきほど閲覧しているガイドの前提となるページを編集しています。あなたが行った変更は、この手順を含むガイド全体に影響を与えます。

英語
日本語

手順 7を翻訳中

手順7
MacBook Pro 13" Retina Display Late 2012 Display Assembly Replacement: 手順 0、 3の画像 1 MacBook Pro 13" Retina Display Late 2012 Display Assembly Replacement: 手順 0、 3の画像 2 MacBook Pro 13" Retina Display Late 2012 Display Assembly Replacement: 手順 0、 3の画像 3
  • Grip both halves of the device, one in each hand.

  • Gently push forward on the bottom half of the device to detach it from the display assembly.

  • Carefully set each component aside, making sure to set down the lower half keyboard-side down.

それぞれのデバイスの上半分をそれぞれの手でしっかり掴みます。

ゆっくりとディスプレイアセンブリから離すように、デバイスの下半分を前向きに向かって押し出します。

丁寧に両方のコンポーネントを脇に置き、下側のキーボード半分を下向きに置きます。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります