メインコンテンツにスキップ

一加5的后盖更换

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての12個のガイドに反映されます。

英語
中国語

手順 2を翻訳中

手順2
OnePlus 5 Back Cover Replacement: 手順 0、 3の画像 1 OnePlus 5 Back Cover Replacement: 手順 0、 3の画像 2 OnePlus 5 Back Cover Replacement: 手順 0、 3の画像 3
  • There is a high risk of damaging the display panel if this opening procedure is improperly followed.

  • The following four steps show how to pry the rear case from the plastic frame. Read through the steps first before attempting the procedure.

  • There are two different seams between the body and the screen of the phone:

  • Display panel seam: This seam is part of the display assembly. Do not pry at this seam, or you will separate and damage the display panel.

  • Frame seam: This is where the plastic frame meets the back cover. Only pry at this seam.

  • There are twelve clips that hold the frame against the rear case. Be aware of their location as you pry the back cover off in the following steps.

你要是不严格按照我们列出的步骤来,你的屏幕极有可能损坏

屏幕和后盖之间有两条缝

屏幕的缝:用红色标出的。不要尝试撬开那条缝,否则你的屏幕必将损坏。

屏幕支架:用黄色标出的。这才是你应该撬开的缝

共有12个暗扣扣住后盖和屏幕,确保取下后盖之前你将它们全都取下了

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります