手順 5を翻訳中
手順5
-
Tap the center pins of the rivets so they are flush with the rivet body.
-
Use #10 x 1/2" Stainless Steel Screws to affix the plate to the mounting bracket. You can see slight indentations where the screws are to go. I drilled pilot holes first.
-
Don't use the "standard" license plate hardware that is 3/4" long. Those screws appear to be long enough to hit the bumper when inserted.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。