メインコンテンツにスキップ

Sostituzione pannello anteriore iPod Touch 5a Generazione

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての21個のガイドに反映されます。

英語
イタリア語

手順 2を翻訳中

手順2
iPod Touch 5th Generation Front Panel Replacement: 手順 0、 2の画像 1 iPod Touch 5th Generation Front Panel Replacement: 手順 0、 2の画像 2
  • Use a hair dryer or prepare an iOpener and apply it to the lower edge of the iPod for about a minute in order to soften up the adhesive underneath.

  • The bottom of the screen (near the home button) is held in place with strong adhesive.

  • As you start prying the screen off in the next stages, you may need to apply more heat to keep the glue warm and flexible.

Utilizza un asciugacapelli oppure prepara un iOpener e applicalo al bordo inferiore dell'iPod per circa un minuto al fine di ammorbidire l'adesivo sottostante.

La base dello schermo (vicino al pulsante home) è tenuta in posizione con un adesivo potente.

Mentre inizi a fare leva per rimuovere lo schermo nei prossimi passi, potresti aver bisogno di applicare più calore per mantenere la colla calda e flessibile.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります