Making a low cost photography light stand

手順 4を翻訳中

英語

日本語

手順4

Remove the bulb socket

Sockets that hold the cord in with a press-fit design are hard to reuse by design. Unless you can depress the cord, cut the cord at the socket and discard the bulb socket.
After removing the plastic cover and switch, remove the bulb socket with a Phillips #2 screwdriver. If your socket is press fit, these are generally not reusable. Cut the cord unless you can pull the cord and not compromise the socket.
Discard any broken or unwanted components.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。