Canon EOS 20D CF card slot repair

手順 4を翻訳中

英語

日本語

手順4

Extra pin fixing tips

This is one of the cases in which I was able to reuse a pin that was broken internally but not externally, simply by pushing it back into place and running a wire from the piece left inside.
When soldering to the vias, note that from the rear (the area where all the pin connections are soldered to), the two pin connections on the far right and far left are ground, and don't connect down to these vias.
Make sure not to leave large lumps of protruding solder like the one here. I ended up having to slim it down, since it touched the metal housing of the connector when I put it back together.
Hopefully when you reassemble your EOS 20D, you won't be getting the "Err CF" message anymore.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。