手順 3を翻訳中
手順3
Fix damage from pins that got pushed in
-
Some pins had gotten pushed in far enough that they ripped up traces, so it was necessary to reroute their connections from the bottom vias.
-
To be able to solder to the vias, you have to scratch the solder mask off of them with a sharp tool like an Xacto knife.
-
Then it can finally be soldered to with a high gauge wire. I took a section of larger stranded-core wire, cut it, and unwound it.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。