手順 1を翻訳中
手順1
-
Remove the two screws (2mm x 6mm) on either side of the FILTER switch on the black and white side of the Betamovie using the Phillips #0 screwdriver.
-
Remove the two screws on the bottom of the camera on the side with the black and white face using the same screwdriver.
-
Remove the screws on the bottom of the back of the camera with the same screwdriver.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。