メインコンテンツにスキップ

Apple Watch Series 2ディスプレイの開口部

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての7個のガイドに反映されます。

英語
日本語

手順 4を翻訳中

手順4
Apple Watch Series 2 Display Opening, Pry up the screen: 手順 0、 3の画像 1 Apple Watch Series 2 Display Opening, Pry up the screen: 手順 0、 3の画像 2 Apple Watch Series 2 Display Opening, Pry up the screen: 手順 0、 3の画像 3
Pry up the screen
  • Place the edge of a curved blade into the thin gap between the display and the outer case. Start at the short side of the display, closest to the digital crown.

  • Press firmly straight down into the gap.

  • Once inserted, tilt the blade to pry the display open slightly.

  • Do not insert the knife more than 1/16th of an inch (~2 mm).

カーブしたブレードをディスプレイとアウターケースの間の隙間の中に当てます。デジタルクラウンに一番近いディスプレイの短いサイドから初めます。

隙間に向けてまっすぐ、しっかりと押し込みます。

差し込んだら、ブレードの角度を傾けてディスプレイをわずかに開く様にこじ開けます。

ナイフ先端を2 mm以上、挿入しないでください。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります