メインコンテンツにスキップ

Nintendo Switch Rückabdeckung austauschen

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての22個のガイドに反映されます。

英語
ドイツ語

手順 1を翻訳中

手順1
Nintendo Switch Rear Panel Replacement, Release the Joy Con controller locking tabs: 手順 0、 3の画像 1 Nintendo Switch Rear Panel Replacement, Release the Joy Con controller locking tabs: 手順 0、 3の画像 2 Nintendo Switch Rear Panel Replacement, Release the Joy Con controller locking tabs: 手順 0、 3の画像 3
Release the Joy Con controller locking tabs
  • Before you begin this repair, make sure the device is completely powered off.

  • Press and hold down the small round button on the back of the Joy Con controller.

  • While you hold down the button, slide the controller upward.

Schalte das Gerät komplett aus, bevor du mit der Reparatur beginnst.

Drücke und halte den kleinen runden Knopf auf der Rückseite des Joy Con Controllers.

Halte den Knopf weiterhin gedrückt und schiebe den Controller nach oben.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります