メインコンテンツにスキップ

iMac Intel 21.5インチ EMC 3068ロジックボードアセンブリの交換

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての4個のガイドに反映されます。

英語
日本語

手順 14を翻訳中

手順14
iMac Intel 21.5" EMC 3068 Logic Board Assembly Replacement: 手順 0、 3の画像 1 iMac Intel 21.5" EMC 3068 Logic Board Assembly Replacement: 手順 0、 3の画像 2 iMac Intel 21.5" EMC 3068 Logic Board Assembly Replacement: 手順 0、 3の画像 3
  • Tilt the top of the logic board away from the rear enclosure.

  • When removing and installing the logic board, take care not to damage the delicate microphone ribbon cable at the bottom left.

  • Lift the logic board straight up and out of the iMac.

  • Be careful not to snag the board on any of the rear enclosure's screw posts.

ロジックボードの上部を持ち上げて、リアエンクロージャーから離します。

ロジックボードを取り出したり、インストールする際は、ボード左側下に付いているデリケートなマイクリボンケーブルにダメージを与えないようご注意ください。

ロジックボードをiMacから持ち上げて取り出します。

ボードをリアエンクロージャー内のネジポストに引っ掛けないようご注意ください。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります