Google Pixel XL Motherboard Replacement

注意：あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての2個のガイドに反映されます。

手順 12を翻訳中

英語

日本語

手順12

Hold the motherboard by the corners and maneuver it out of its recess, being careful not to snag any cables.
During reinstallation, be sure to route both antenna cables underneath the motherboard edges, and direct them through the cable notches.
The fingerprint sensor connector can be tricky to reconnect during reinstallation.
Bend the fingerprint sensor cable slightly so that it bows upward near the connector.
Stand the motherboard up and position it such that the connector rests against the socket.
Use your finger to carefully align the connector and press it into the socket. Do not use excessive force! If done correctly, the socket should hold the connector securely.
If you are having a difficult time, follow this guide, which removes the fingerprint sensor from its indention before attaching it to the motherboard.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。