現在取り組み中のこの deviceの特定のパーツやコンポーネントの詳細を記載してください。 例: バッテリー
タイトルを作成
ガイドの編集に取りかかる前に参考資料に目を通してください。
手順1 — Open housing
Remove the brush head
手順2 — Remove lower cap
Remove lower cap (2 plastic tabs). O-ring is already removed in this picture.
手順3 — Replace the battery
Unwrap the battery and replace it (see Soldering Skills).
手順4 — controls
Before assembly, check the upper seal and the lower O-ring and replace those if necessary.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。