iRobot Roomba 690 Filter Replacement - iFixit 修理ガイド

リペアコミュニティに参加 - アカウントの作成

はじめに

In order to ensure your iRobot Roomba 690 is properly maintained, it is essential that the filter is removed for cleaning to prevent its performance from decreasing or debris damaging other parts of the Roomba. Sometimes the filter will require replacement due to being old or damaged itself. It is recommended that the filters be replaced on a Roomba every 6-12 months and cleaned weekly. No additional tools are needed to perform this task, as it is necessary to do frequently to ensure maximum cleaning performance, though you may need some cleaning items for the filter depending on how much debris it collected.

必要な工具と部品

手順1 Filter

iRobot Roomba 690 Filter Replacement, Filter: 手順 1、 1の画像 1

Place the Roomba upside down so that the wheels and brushes are facing upward.

手順2

iRobot Roomba 690 Filter Replacement: 手順 2、 1の画像 1

Press the release button on the top side of the Roomba's filter module.
Slide the module out and away from the Roomba.

手順3

iRobot Roomba 690 Filter Replacement: 手順 3、 1の画像 1

Pull on the yellow tab to open the filter latch.

手順4

iRobot Roomba 690 Filter Replacement: 手順 4、 2の画像 1

iRobot Roomba 690 Filter Replacement: 手順 4、 2の画像 2

Slide the filter out of the module.

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

2人の作成者と共同で作成されました。

John Galvin

メンバー登録日: 03/23/22

584 ポイント

5のガイドは作成済み

+3 個以上のバッジ

チーム

UMass Dartmouth, Team 1-1, Botvin Spring 2022 UMass Dartmouth, Team 1-1, Botvin Spring 2022人のメンバー

UMASSD-BOTVIN-S22S1G1

2 メンバー

5のガイドは作成済み

0件のガイドコメント

統計データ:

過去 24時間: 0

過去 7 日: 2

過去 30 日: 7

今までの合計 377