修理を始めるには コミュニティ ストア

iRobot Braava Jet 240 Wheel Replacement

はじめに

If the wheels on your iRobot Braava Jet 240 need to be replaced, follow this guide.

The wheels of the iRobot Braava Jet 240 are connected to the motor assembly and allow the robot to move around the room to clean. If there is debris caught in the wheels, removing them to clean out debris will be useful. Additionally, if the tire tread is loose or the wheels are otherwise damaged, they should be removed and replaced.

必要な工具と部品

  1. iRobot Braava Jet 240 Wheel Replacement, Battery: 手順 1、 1の画像 1

    • Turn the device off.

    翻訳

  2. iRobot Braava Jet 240 Wheel Replacement: 手順 2、 2の画像 1 iRobot Braava Jet 240 Wheel Replacement: 手順 2、 2の画像 2

    • Use your fingers to gently pop out the battery.

    翻訳

  3. iRobot Braava Jet 240 Wheel Replacement, Mop Pad: 手順 3、 2の画像 1 iRobot Braava Jet 240 Wheel Replacement, Mop Pad: 手順 3、 2の画像 2

    • Lift up the handle to reveal the eject button.

    翻訳

  5. iRobot Braava Jet 240 Wheel Replacement: 手順 4、 3の画像 1 iRobot Braava Jet 240 Wheel Replacement: 手順 4、 3の画像 2 iRobot Braava Jet 240 Wheel Replacement: 手順 4、 3の画像 3

    • Use your finger to push the eject button forward.

    翻訳

  6. iRobot Braava Jet 240 Wheel Replacement: 手順 5、 1の画像 1

    • Tilt the robot on its side and let the mop pad slide out.

    翻訳

  7. iRobot Braava Jet 240 Wheel Replacement, Wheel: 手順 6、 2の画像 1 iRobot Braava Jet 240 Wheel Replacement, Wheel: 手順 6、 2の画像 2

    • Using your thumbs, first push back the motor assembly, then push up.

    翻訳

  8. iRobot Braava Jet 240 Wheel Replacement: 手順 7、 2の画像 1 iRobot Braava Jet 240 Wheel Replacement: 手順 7、 2の画像 2

    • Remove the 11.55 mm screws in the middle of both wheels using the Phillips #1 screwdriver.

    翻訳

  9. iRobot Braava Jet 240 Wheel Replacement: 手順 8、 3の画像 1 iRobot Braava Jet 240 Wheel Replacement: 手順 8、 3の画像 2 iRobot Braava Jet 240 Wheel Replacement: 手順 8、 3の画像 3

    • Pull the wheel off from the axel, pulling from the top end first so it can slide out at an angle.

    • It will be easier to remove the wheels if the motor assembly is tilted so that the wheel that you are removing is elevated.

    翻訳
終わりに

To reassemble your device, follow these instructions in reverse order.

8 の人々がこのガイドを完成させました。

作成者

3人の作成者と共同で作成されました。

Claire Franz

メンバー登録日: 02/10/20

2,772 ポイント

7のガイドは作成済み

バッジ: 18

+15 個以上のバッジ

チーム

Cal Poly, Team S22-G2, Regan Winter 2020 Cal Poly, Team S22-G2, Regan Winter 2020人のメンバー

CPSU-REGAN-W20S22G2

5 メンバー

12のガイドは作成済み

6 件のコメント

Thank you so much!

Michaela - 返信

Where can I get the replacement wheels?

John

john - 返信

iRobot does not sell replacement parts for the 240, other than things like batteries. I look for dead As-Is units on eBay and buy them to scavenge parts. (And it really irks me that iRobot doesn't sell the parts!)

William Fickas -

Thanks, William Fickas! I wish I knew this when I bought my 240. Selling their product but not keeping long term customers happy seems to be this company's mantra.

ejhcornelisse - 返信

Followed the guide and a spring fell out!? It has 5 turns and about 1" long with a 3/16" loop on one end? I'm thinking that I lifted the wheel assembly up just a bit too high. Any idea where that spring came from? Maybe somewhere in the middle of the assemble? Other than that the guide is perfect! Thank you and keep up the good work!

Bob Read - 返信

コメントを追加

統計データ:

過去 24時間: 3

過去 7 日: 14

過去 30 日: 82

今までの合計 8,596