手順 3を翻訳中
手順3
-
Using the Torx T5 Screwdriver, carefully remove all of the screws in the motherboard.
-
There are 8 black screws: 4 at the top and 4 at the bottom of the motherboard.
-
There are 2 silver screws on the side: 1 at the bottom and 1 in the middle.
-
Use either a T3 (Ultra) or T4 (MAXX) to remove the single screw securing the camera housing.
-
Using the plastic opening tool, gently lift the two tabs in the upper plastic cover that surrounds the camera to release the cover.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。