Dell XPS 15-L502X Front Cover Replacement

注意：あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての3個のガイドに反映されます。

英語

日本語

手順 1を翻訳中

手順1

Before prying up on the cover, you may have to first remove a screw located inside the battery compartment (M2X3) and release the two latches. If you don't release the latches, you may snap the cover.
Pry up the top of the cover first by using a spudger to wedge in between the cover and base of the computer.
Once the spudger is between the cover and the base of the computer, wedge underneath the remaining border surrounding the keyboard.
Cracking sounds are normal. Be careful and take your time removing this panel.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。