手順 2を翻訳中
手順2
Removing the speaker
-
Desolder the speaker wires from the circuit board
-
To desolder, turn the soldering iron on and let it heat up
-
Touch the tip of the soldering iron to one of the solder joints until it melts. This will happen very quickly.
-
Pull the wire out of the solder and remove the soldering iron.
-
Repeat the last 3 steps for the second wire
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。