Xbox Series X バックパネルの交換

注意：あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての24個のガイドに反映されます。

ガイドに戻る

英語

日本語

手順 1を翻訳中

手順1

Xbox Series X (Digital Edition) Back Panel Replacement, Uncover the back panel screws: 手順 0、 2の画像 1

Xbox Series X (Digital Edition) Back Panel Replacement, Uncover the back panel screws: 手順 0、 2の画像 2

Uncover the back panel screws

Before you begin, completely power down and unplug all cables from your console.
Two stickers cover the back panel screws. You can remove the stickers without heating them, though it makes them much easier to remove cleanly.
Heat an iOpener and lay it on the smaller sticker near the bottom of the back panel for two minutes.
Alternatively, you can use a hair dryer to heat the sticker.

+	[title] Uncover the back panel screws
+	[* icon_caution] *Before you begin, completely power down and unplug all cables from your console.*
+	[* icon_note] [link\|https://guide-images.cdn.ifixit.com/igi/ILtlPEkWqVaaBPqt.full\|Two stickers\|new_window=true] cover the back panel screws. You can remove the stickers without heating them, though it makes them much easier to remove cleanly.
+	[* black] [guide\|25705\|Heat an iOpener\|new_window=true] and lay it on the smaller sticker near the bottom of the back panel for two minutes.
+	[* icon_note] Alternatively, you can use a [guide\|157348\|hair dryer\|new_window=true] to heat the sticker.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。