手順 2を翻訳中
手順2
-
Identify SW2, SW3, and SW4 which are marked on the removed mini module.
-
Use a desoldering pump or solder wick to remove the solder from the contacts of SW14 and SW15.
-
Carefully remove the old buttons using tweezers.
-
Position the new click mechanisms for SW14 and SW15 and secure them by resoldering to the contacts.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。