ZTE Axon 7 Screen Replacement

英語

日本語

手順 3を翻訳中

手順3

Slide a thin, ESD-safe pry tool or tweezers under the wire until it's snug against the connector, and pry straight up from the board to disconnect the coaxial antenna cable.
To reinstall, hold the connector in place and gently press it straight down. This connector should “snap” into the socket much like the metal snaps on a jacket.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。