手順 6を翻訳中
手順6
Take out the motor and length-adjustment-assembly
-
The assembly is held in place by one Torx T8 screw, identical to those from step 3.
-
The ring of the length-adjustment-assembly can slide down. A little pin-and-spring will fall out - don't loose it! It is used to make the "clicking" feedback when rotating the ring.
-
I did not disassemble this assembly any further.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。