メインコンテンツにスキップ

Samsung Galaxy S20 Ultra フレックスケーブルの取り外し

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての7個のガイドに反映されます。

英語
日本語

手順 1を翻訳中

手順1
Samsung Galaxy S20 Ultra Flex Cable Removal, Disconnect the daughterboard: 手順 0、 3の画像 1 Samsung Galaxy S20 Ultra Flex Cable Removal, Disconnect the daughterboard: 手順 0、 3の画像 2 Samsung Galaxy S20 Ultra Flex Cable Removal, Disconnect the daughterboard: 手順 0、 3の画像 3
Disconnect the daughterboard
  • Use a spudger to pry up and disconnect the main and auxiliary flex cables from the daughterboard near the bottom of the device.

  • To re-attach press connectors like this one, carefully align and press down on one side until it clicks into place, then repeat on the other side. Do not press down on the middle. If the connector is misaligned, the pins can bend, causing permanent damage.

スパッジャーを使って、デバイス下部付近のドーターボードからメインとサブのフレックスケーブルをこじ開けて、接続を外します。

このようなプレスコネクタを再装着する際は、慎重に位置合わせし、カチッと所定の位置に収まるまで片側を押し下げてから、反対側も同じ作業を繰り返します。 中央部分を押し下げないでください。 コネクタの位置がずれていると、ピンが曲がって永久的な損傷を引き起こす可能性があります。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります