手順 3を翻訳中
手順3
-
Locate the single pin holding the negative and positive wires to the motherboard. Each lead should have one pin holding each wire to the green side of the motherboard.
-
Using a soldering iron, melt the existing solder point for the red lead (positive line).
-
Using a soldering iron, melt the existing solder point for the black lead (negative line).
-
Pull the red and black leads through their respective holes, out of the motherboard.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。