メインコンテンツにスキップ

iPod Touch 第5世代のフロントパネルの交換

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての21個のガイドに反映されます。

英語
日本語

手順 3を翻訳中

手順3
iPod Touch 5th Generation Front Panel Replacement: 手順 0、 2の画像 1 iPod Touch 5th Generation Front Panel Replacement: 手順 0、 2の画像 2
  • Center the suction cup on the lower section of the glass, with its edge centered over the home button.

  • Press in firmly and make sure the cup has a strong seal.

吸盤カップをガラス下部の中央に装着します。カップ端を、ホームボタンの中央に配置します。

カップがしっかりと固定するように、押し込んで空気を抜いてください。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります