e-lite web150 Disassembly

Firmly press the yellow button and slide the blower nozzle off.

un-screw all of the screws

pull apart the 2 halves

This is the inside of the blower

gently pull out the power plug and switch

gently pull out the motor paying attention to which side it came out of.

clean the dust out if you need to. then carefully put the motor back in making sure you put both of the tabs on the motor into their respective slots. you can't see the other one because I had to crop it out.

carefully put the plugs back into their holders.

fit the 2 halves back together

replace all of the screws

slide the blower nozzle on to the main body until it locks in place, you are done.