はじめに

If the face buttons on the Xbox Duke Controller aren't working properly, sticking when you press them, not registering input, or delaying the input, use this guide to replace them.

Before using this guide, check to see if there is dirt or debris that is interfering with the buttons. Spraying a small amount of contact cleaner into the button can potentially fix the problem. Otherwise, the problem may lie in the silicone pads or the double-sided graphite tape that contacts the motherboard.

Before beginning, make sure to disconnect your Duke controller from the Xbox or any other console it may be plugged into.

必要な工具と部品

手順1 Face Plate

Xbox Duke Controller Face Buttons Replacement, Face Plate: 手順 1、 3の画像 1

Xbox Duke Controller Face Buttons Replacement, Face Plate: 手順 1、 3の画像 2

Xbox Duke Controller Face Buttons Replacement, Face Plate: 手順 1、 3の画像 3

Remove the seven black 8 mm screws holding the two halves of the Duke together using a Phillips #1 screwdriver.
To reach the deeply set screws, use a longer screw driver or a 4.0 socket bit in addition to the PH1 bit.

編集

手順2

Xbox Duke Controller Face Buttons Replacement: 手順 2、 3の画像 3

Remove the two halves of the Duke, placing the top plate face-down so the buttons don't fall out.

編集

手順3 Face Buttons

Xbox Duke Controller Face Buttons Replacement, Face Buttons: 手順 3、 3の画像 1

Xbox Duke Controller Face Buttons Replacement, Face Buttons: 手順 3、 3の画像 2

Xbox Duke Controller Face Buttons Replacement, Face Buttons: 手順 3、 3の画像 3

Remove the silicone pads and pull out the directional pad assembly.

編集

手順4

Xbox Duke Controller Face Buttons Replacement: 手順 4、 3の画像 3

Using a plastic opening tool, remove the plastic plate from the bottom of the directional pad assembly.
Pull out the silicone pad.

編集

手順5

Remove the silicone pads from the top plate of the controller and remove all of the face buttons.
To replace the buttons, line them up with the grooves in the top plate.

編集