はじめに

This guide is designed to help users remove MiP’s wheels. MiP has two wheels that are connected to its body with screws. If the wheels need replacement or cleaning, follow this guide.

Use a metal spudger to carefully pry off the hubcap without marring the plastic wheel or hubcap. This plastic material is not replaceable. Any damage will be noticeable.
  • Use a metal spudger to carefully pry off the hubcap without marring the plastic wheel or hubcap.

  • This plastic material is not replaceable. Any damage will be noticeable.

コメントを追加する

Remove the 12.0 mm Phillips #2 screw. Hold the wheel in place, or it will rotate as you attempt to remove the screw.
  • Remove the 12.0 mm Phillips #2 screw.

  • Hold the wheel in place, or it will rotate as you attempt to remove the screw.

コメントを追加する

Pull the wheel off of the square axle.
  • Pull the wheel off of the square axle.

  • Do not use excessive force while removing the wheel. Pulling too hard on the wheel can damage the axle.

コメントを追加する

Remove the three 7.7 mm Phillips #1 screws. Remove the three 7.7 mm Phillips #1 screws.
  • Remove the three 7.7 mm Phillips #1 screws.

コメントを追加する

Separate the rubber tire from the rim. Push the collar out to separate the plastic layers of the wheel. When reassembling, align the groove and the key of the two wheels' halves together.
  • Separate the rubber tire from the rim.

  • Push the collar out to separate the plastic layers of the wheel.

  • When reassembling, align the groove and the key of the two wheels' halves together.

コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

2 の人々がこのガイドを完成させました。

Moira Keahon

メンバー登録日: 2014年09月24日

148 ポイント

3のガイドは作成済み

チーム

University of Maine, Team 1-50, Diaz Fall 2014 University of Maine, Team 1-50, Diaz Fall 2014人のメンバー

UMAINE-DIAZ-F14S1G50

3 メンバー

3のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 2

過去 7 日: 24

過去 30 日: 46

今までの合計 3,534