修理を始めるには コミュニティ ストア

Vizio VTAB1008 Digitizer (Touchscreen) Replacement

はじめに

Hello! This guide will show you how to replace the digitizer on your Vizio VTAB1008.

必要な工具と部品

  1. Vizio VTAB1008 Digitizer (Touchscreen) Replacement, Vizio VTAB1008 Back Cover Removal: 手順 1、 2の画像 1 Vizio VTAB1008 Digitizer (Touchscreen) Replacement, Vizio VTAB1008 Back Cover Removal: 手順 1、 2の画像 2

    • Carefully slide the heavy duty opening tool between the gap on the side of the device with no buttons.

    • Do not insert the opening tool too far into the tablet as this can damage connectors close to edges of the cover.

    • The angled tip of the opening tool can be wedged into the device by pressing on the back of the opening tool with the thumb. Move the opening tool in a sliding motion to ensure all tabs separate.

    • Corner tabs may require a more forceful prying tool. If needed, carefully insert the metal prying tool into corners to separate the tabs.

    翻訳

  2. Vizio VTAB1008 Digitizer (Touchscreen) Replacement: 手順 2、 1の画像 1

    • Look into the tablet for loose connectors.

    • There are three loose connectors: one for the screen, one for the digitizer, and one for the motherboard. They are held in place by the pressure of the backing and screen assemblies.

    • Flip the backing from the button-less side over, being careful not to separate the ribbon connector from the display screen.

    翻訳

  4. Vizio VTAB1008 Digitizer (Touchscreen) Replacement, Digitizer/Touch Screen: 手順 3、 3の画像 1 Vizio VTAB1008 Digitizer (Touchscreen) Replacement, Digitizer/Touch Screen: 手順 3、 3の画像 2 Vizio VTAB1008 Digitizer (Touchscreen) Replacement, Digitizer/Touch Screen: 手順 3、 3の画像 3

    • Remove the two screws present using the J1 Screw bit.

    • The screw has a head size of 4.3 mm and is 3 mm tall.

    翻訳

  5. Vizio VTAB1008 Digitizer (Touchscreen) Replacement: 手順 4、 3の画像 1 Vizio VTAB1008 Digitizer (Touchscreen) Replacement: 手順 4、 3の画像 2 Vizio VTAB1008 Digitizer (Touchscreen) Replacement: 手順 4、 3の画像 3

    • Remove the two brackets accompanying screws by lifting them up and away from the screen.

    • Brackets are 8.5 mm by 6.55 mm.

    翻訳

  6. Vizio VTAB1008 Digitizer (Touchscreen) Replacement: 手順 5、 3の画像 1 Vizio VTAB1008 Digitizer (Touchscreen) Replacement: 手順 5、 3の画像 2 Vizio VTAB1008 Digitizer (Touchscreen) Replacement: 手順 5、 3の画像 3

    • Separate the screen digitizer from the display screen, noting the placement of the quick disconnect ribbon cable.

    • Use a spudger if necessary to assist in the separation.

    翻訳

  7. Vizio VTAB1008 Digitizer (Touchscreen) Replacement: 手順 6、 2の画像 1 Vizio VTAB1008 Digitizer (Touchscreen) Replacement: 手順 6、 2の画像 2

    • The digitizer should now be able to be freely removed.

    翻訳
終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

4人の作成者と共同で作成されました。

Gilberto Ambriz

メンバー登録日: 09/29/16

546 ポイント

5のガイドは作成済み

バッジ: 12

+9 個以上のバッジ

チーム

Eastern Washington University, Team 1-1, Crane Fall 2016 Eastern Washington University, Team 1-1, Crane Fall 2016人のメンバー

EWU-CRANE-F16S1G1

4 メンバー

12のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 650