メインコンテンツにスキップ

Verizon Ellipsis 10 WiFi Module Replacement

必要な工具と部品

  1. Verizon Ellipsis 10 WiFi Module Replacement, Back Cover: 手順 1、 1の画像 1
    • Open the SD/SIM card cover to start prying off the back cover.

  2. Verizon Ellipsis 10 WiFi Module Replacement: 手順 2、 1の画像 1
    • Start using the iFixit Opening Tool in the SD/SIM area to release the clips holding the back panel on.

  3. Verizon Ellipsis 10 WiFi Module Replacement: 手順 3、 1の画像 1
    • Follow along the edge of the device to undo all of the retaining clips.

  4. Verizon Ellipsis 10 WiFi Module Replacement: 手順 4、 1の画像 1
    • Once all the clips are undone, the back panel should come off with little effort.

  5. Verizon Ellipsis 10 WiFi Module Replacement, WiFi Module: 手順 5、 1の画像 1
    • Locate WiFi module in bottom right-hand corner.

  6. Verizon Ellipsis 10 WiFi Module Replacement: 手順 6、 1の画像 1
    • Unscrew the M1.5 screw using a Phillips #00 screwdriver.

  7. Verizon Ellipsis 10 WiFi Module Replacement: 手順 7、 1の画像 1
    • Using a pair of tweezers or needle nose pliers, pull up the connecting wire.

    • Lift the module out.

終わりに

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

作成者

3人の作成者と共同で作成されました。

Mary Duran

メンバー登録日: 04/03/19

597 ポイント

4のガイドは作成済み

チーム

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 1

今までの合計 201