メインコンテンツにスキップ

はじめに

This guide demonstrates a walk-through of steps needed to completely dismantle the phone in order to locate the screen cover and replace it with a new one.

パーツ

パーツは指定されていません。

  1. Slide the back cover off the cause.
    • Slide the back cover off the cause.

  2. Lift the battery.
    • Lift the battery.

    • Unplug the two pin cable from the connector.

  3. Unscrew the two 10mm screws in phone base.
    • Unscrew the two 10mm screws in phone base.

  4. MacBook Battery 修理キット

    最低価格 $69.99

    Buy Now

    MacBook Battery 修理キット

    最低価格 $69.99

    Buy Now
  5. Using the metal spudger gently, but firmly edge along the device .
    • Using the metal spudger gently, but firmly edge along the device .

    • When you feel a hook or latch use a firm but gentle lifting motion upward to unlatch the front and back case.

  6. Unscrew a second set of 10mm screws to access to the other side.
    • Unscrew a second set of 10mm screws to access to the other side.

  7. The front case is now free and able to be manipulated.
    • The front case is now free and able to be manipulated.

    • Set aside the circuit board and back case as they will get in the way.

  8. Using a single finger apply a light force on the screen cover to release from the case.
    • Using a single finger apply a light force on the screen cover to release from the case.

    • Now the old screen can be replaced with a new desired one, simply properly align and it will clip into place.

まとめ

To reassemble your device, follow these instructions in reverse order.

Charles montes

メンバー登録日: 2016年10月20日

501 ポイント

5のガイドは作成済み

チーム

UMass Dartmouth, Team 5-5, Martin Fall 2016 UMass Dartmouth, Team 5-5, Martin Fall 2016人のメンバー

UMASSD-MARTIN-F16S5G5

3 メンバー

5のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 1

今までの合計 70