メインコンテンツにスキップ

はじめに

This guide demonstrates a walk-through of steps needed to completely dismantle the phone in order to locate the buttons and replace them with new ones.

パーツ

パーツは指定されていません。

  1. Remove the sliding back cover from case.
    • Remove the sliding back cover from case.

  2. lift the battery and unplug the two pin cable from phone base.
    • lift the battery and unplug the two pin cable from phone base.

  3. Remove the two 10mm screws at the base of the phone .
    • Remove the two 10mm screws at the base of the phone .

  4. MacBook Battery 修理キット

    最低価格 $69.99

    Buy Now

    MacBook Battery 修理キット

    最低価格 $69.99

    Buy Now
  5. Use the spudger along the edge using a firm but gentle lifting motion.
    • Use the spudger along the edge using a firm but gentle lifting motion.

    • When doing this feel for the hooks that latch the phones front and back cases.

  6. Unscrew a second set of 10mm screws to obtain access to the other side.
    • Unscrew a second set of 10mm screws to obtain access to the other side.

  7. The front of the phone can now be placed to the side
    • The front of the phone can now be placed to the side

    • You will notice the button covers, these display the numerical values and positions of each button

    • These can be placed aside as they will get in the way later.

  8. Now the silicon pads for the phone buttons are exposed.
    • Now the silicon pads for the phone buttons are exposed.

    • These can easily be removed by pulling away the pads from the circuit board.

    • To replace simply align the new pad onto the button positions.

まとめ

To reassemble your device, follow these instructions in reverse order.

Charles montes

メンバー登録日: 2016年10月20日

501 ポイント

5のガイドは作成済み

チーム

UMass Dartmouth, Team 5-5, Martin Fall 2016 UMass Dartmouth, Team 5-5, Martin Fall 2016人のメンバー

UMASSD-MARTIN-F16S5G5

3 メンバー

5のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 69