メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

はじめに

Does your device not respond when buttons are pressed? Do only a few buttons seem to function correctly? This guide will walk through the steps required to replace the buttons.

パーツ

パーツは指定されていません。

  1. To remove the battery door, loosen the screw shown using a Phillips #2 screwdriver.
    • To remove the battery door, loosen the screw shown using a Phillips #2 screwdriver.

    • A coin can also be used to loosen the screw.

  2. Remove the battery door.
    • Remove the battery door.

    • Take out the batteries.

  3. Remove the rear panel screws using a Phillips #2 screwdriver.
    • Remove the rear panel screws using a Phillips #2 screwdriver.

    • Two 21.6mm (Long)

    • One 9.8mm (Short)

    • Five 13.8mm (Medium)

  4. Gently pull up on the rear panel. Be careful not to pull on the wire connections.
    • Gently pull up on the rear panel.

    • Be careful not to pull on the wire connections.

    • Rest the laptop open on the table.

  5. Using a Phillips #0 screwdriver remove the two 6.0mm screws.
    • Using a Phillips #0 screwdriver remove the two 6.0mm screws.

  6. Lift up on the board and set it aside. Movement of the board will be limited. Be careful not to damage the connection to the motherboard.
    • Lift up on the board and set it aside.

    • Movement of the board will be limited. Be careful not to damage the connection to the motherboard.

  7. Remove each button and button contact.
    • Remove each button and button contact.

終わりに

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

Christopher Kourmoulakis

メンバー登録日: 2015年09月03日

373 ポイント

3のガイドは作成済み

チーム

USF Tampa, Team 12-2, Blackwell Fall 2015 USF Tampa, Team 12-2, Blackwell Fall 2015人のメンバー

USFT-BLACKWELL-F15S12G2

4 メンバー

7のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 1

過去 7 日: 3

過去 30 日: 13

今までの合計 486