メインコンテンツにスキップ

UTStarcom CDM8945vw Speaker Replacement

必要な工具と部品

  1. UTStarcom CDM8945vw Speaker Replacement, Battery: 手順 1、 1の画像 1
    • Push the highlighted button in the direction in which the antenna is pointing. The battery will release and pop up.

  2. UTStarcom CDM8945vw Speaker Replacement: 手順 2、 1の画像 1
    • Remove the battery.

  3. UTStarcom CDM8945vw Speaker Replacement, Antenna: 手順 3、 1の画像 1
    • Identify the antenna. It is the extendable plastic component pictured here.

  4. UTStarcom CDM8945vw Speaker Replacement: 手順 4、 1の画像 1
    • Twist the base in a counter-clockwise motion to unscrew the antenna.

  5. UTStarcom CDM8945vw Speaker Replacement: 手順 5、 2の画像 1 UTStarcom CDM8945vw Speaker Replacement: 手順 5、 2の画像 2
    • The antenna should slide right out of the phone when finished.

  6. UTStarcom CDM8945vw Speaker Replacement, Speaker: 手順 6、 1の画像 1
    • Remove the small rubber grommet using the plastic opening tool.

  7. UTStarcom CDM8945vw Speaker Replacement: 手順 7、 1の画像 1
    • Remove five screws using a Phillips #00 screwdriver.

  8. UTStarcom CDM8945vw Speaker Replacement: 手順 8、 1の画像 1
    • Use the plastic opening tool to separate the two pieces that form the outer case of the phone.

    • Prying the two pieces apart may be difficult. Carefully apply a moderate amount of pressure when attempting to separate the two pieces or else you will risk breaking them.

  9. UTStarcom CDM8945vw Speaker Replacement: 手順 9、 1の画像 1
    • Remove the back piece of the outer case.

  10. UTStarcom CDM8945vw Speaker Replacement: 手順 10、 1の画像 1
    • Remove the speaker using a plastic opening tool.

    • Apply a small amount of force when removing the broken speaker from the motherboard. If you apply a large amount of force, you may rip out the wires and damage the motherboard.

  11. UTStarcom CDM8945vw Speaker Replacement: 手順 11、 2の画像 1 UTStarcom CDM8945vw Speaker Replacement: 手順 11、 2の画像 2
    • Remove the wire attached to the speaker from the motherboard using tweezers.

    • Apply a small amount of force when removing the wire from the motherboard. If you apply a large amount of force, you may rip out the wires and damage the motherboard.

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

5人の作成者と共同で作成されました。

Eli

メンバー登録日: 09/27/12

1 ポイント

2のガイドは作成済み

チーム

Cal Poly, Team 24-26, Regan Fall 2012 Cal Poly, Team 24-26, Regan Fall 2012人のメンバー

CPSU-REGAN-F12S24G26

4 メンバー

10のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 1

今までの合計 337