はじめに

If your back case is cracked or broken this guide will show you how it is removed and replaced.

Remove the battery cover. Remove the AAA batteries from the calculator.
  • Remove the battery cover.

  • Remove the AAA batteries from the calculator.

コメントを追加する

Remove the 5mm Philips #00 screw holding backup battery cover.
  • Remove the 5mm Philips #00 screw holding backup battery cover.

  • Remove the backup battery cover.

コメントを追加する

Use plastic opening tool to remove the backup battery.  Place the tool in the small cut-out next to the battery and pry the battery out.
  • Use plastic opening tool to remove the backup battery. Place the tool in the small cut-out next to the battery and pry the battery out.

  • Be careful, the backup battery is spring loaded and may shoot up when you remove it.

コメントを追加する

Unscrew the six 7.5mm T6 screws on the back case. You will need to use a screwdriver with a long and skinny head.
  • Unscrew the six 7.5mm T6 screws on the back case. You will need to use a screwdriver with a long and skinny head.

コメントを追加する

Pry back case off.  Insert the plastic opening tool in the track for the protective cover and pry the halves of the case apart. Pry back case off.  Insert the plastic opening tool in the track for the protective cover and pry the halves of the case apart.
  • Pry back case off. Insert the plastic opening tool in the track for the protective cover and pry the halves of the case apart.

コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

4 の人々がこのガイドを完成させました。

Jared

メンバー登録日: 2012年10月02日

76 ポイント

2のガイドは作成済み

チーム

Cal Poly, Team 18-37, Regan Fall 2012 Cal Poly, Team 18-37, Regan Fall 2012人のメンバー

CPSU-REGAN-F12S18G37

5 メンバー

5のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 1

過去 7 日: 11

過去 30 日: 62

今までの合計 6,718