パーツ

パーツは必要ありません。

  1. Using the Phillips head screwdriver PH000, remove the two 1.4 mm screws that are located on the backside of the device.
    • Using the Phillips head screwdriver PH000, remove the two 1.4 mm screws that are located on the backside of the device.

  2. Free shipping on all orders over $100 or containing a Pro Tech Toolkit!

    当社のショップを閲覧する
  3. Slide the back cover off by pushing it to the left, away from the side that held the screws.
    • Slide the back cover off by pushing it to the left, away from the side that held the screws.

    • Remove the cover.

  4. This is what the device should look like once the back cover panel has been removed.
    • This is what the device should look like once the back cover panel has been removed.

まとめ

To reassemble your device, follow these instructions in reverse order.

Terrika Ngobili

メンバー登録日: 2014年10月13日

833 ポイント

7のガイドは作成済み

チーム

Clemson, Team 1-4, Benson Fall 2014 Clemson, Team 1-4, Benson Fall 2014人のメンバー

CLEM-BENSON-F14S1G4

4 メンバー

11のガイドは作成済み

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 3

今までの合計 174