はじめに

Replacing the lens mount requires removing any lens that is already attached then simply removing the casing of the lens mount.

パーツ

パーツは必要ありません。

Hold lens and camera securely with two hands. With the hand holding the camera, push down on the lens button. Twist the lens counterclockwise and pull out to release lens.
  • Hold lens and camera securely with two hands.

  • With the hand holding the camera, push down on the lens button. Twist the lens counterclockwise and pull out to release lens.

コメントを追加する

Using your screwdriver, remove the four (3.5 mm) Phillips screws on the front face of the lens mount.
  • Using your screwdriver, remove the four (3.5 mm) Phillips screws on the front face of the lens mount.

  • Make sure to keep track of these screws and not misplace them.

コメントを追加する

Remove the silver plate by gently pinching with your fingers.
  • Remove the silver plate by gently pinching with your fingers.

コメントを追加する

Now the black plate should be exposed. You can remove this again by gently pinching with your fingers and lifting up.
  • Now the black plate should be exposed. You can remove this again by gently pinching with your fingers and lifting up.

コメントを追加する

Using the tweezers, grab the thin silver ring and lift up.
  • Using the tweezers, grab the thin silver ring and lift up.

コメントを追加する

The camera mount should now be barren and look like this.
  • The camera mount should now be barren and look like this.

コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

Emily Trujillo

メンバー登録日: 2014年04月08日

1,060 ポイント

6のガイドは作成済み

チーム

Cal Poly, Team 8-9, Regan Spring 2014 Cal Poly, Team 8-9, Regan Spring 2014人のメンバー

CPSU-REGAN-S14S8G9

4 メンバー

7のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 4

過去 30 日: 10

今までの合計 1,759