Sony Ericsson Xperia Play Digitizer Replacement

Remove the 6 silver torx screws marked in red

Remove the 7 black torx screws marked in yellow.

Using a plastic prying tool, go around the outside of the phone releasing the plastic clips.

Remove the plastic housing revealing the motherboard

Remove the two Phillips screws.

Remove the headphone jack by carefully moving the dark plastic clip on the connector to 90 degrees

Slide the phone to the open position

Remove the display connector marked in orange using a plastic spudger to pry it upwards

Remove the connector for the front buttons by prising the retaining clip to 90 degrees

Remove motherboard

Remove the buttons from the phone

Remove the three Phillips screws.

Slide the metal frame across revealing the last screw . Make sure to keep the plastic cover after removing the screw

Disconnect the digitizer cable

Insert a plastic spudger around the edge of the frame and take the lcd assembely from the glass

Using a heat gun heat around the edges of the glass to soften the glue, and use your prying tool between the glass and the frame to take the glass off.