はじめに

Use this guide to help you replace the LCD.

Insert the edge of an opening tool between the front cover and the phone. Gently pry off the front cover working your way around the edges.
  • Insert the edge of an opening tool between the front cover and the phone.

  • Gently pry off the front cover working your way around the edges.

コメントを追加する

Pull the front cover down and away from the phone. The front keypads might come off with the front cover.  Do not lose these.
  • Pull the front cover down and away from the phone.

  • The front keypads might come off with the front cover. Do not lose these.

コメントを追加する

Gently peel the keypad away from the phone.
  • Gently peel the keypad away from the phone.

コメントを追加する

Insert a spudger between the lower edge of the screen and the phone. Pry the screen up to disconnect the tabs on each side holding the screen in.
  • Insert a spudger between the lower edge of the screen and the phone.

  • Pry the screen up to disconnect the tabs on each side holding the screen in.

  • Do not remove the screen yet. There is a ribbon connecting the screen to the motherboard.

コメントを追加する

Use a spudger to remove the ribbon cable from the motherboard. Lift the screen away from the phone
  • Use a spudger to remove the ribbon cable from the motherboard.

  • Lift the screen away from the phone

コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

5 の人々がこのガイドを完成させました。

Diego

メンバー登録日: 2011年10月09日

307 ポイント

8のガイドは作成済み

チーム

Cal Poly, Team 5-31, Amido Fall 2011 Cal Poly, Team 5-31, Amido Fall 2011人のメンバー

CPSU-AMIDO-F11S5G31

4 メンバー

12のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 6

過去 7 日: 9

過去 30 日: 26

今までの合計 4,814