はじめに

In this guide the back housing of the phone will be removed and the camera lens will be removed from the housing.

  1. Find the small notch on the side of the phone. The notch is located by the "fast-forward" button and the "lock" switch.
    • Find the small notch on the side of the phone. The notch is located by the "fast-forward" button and the "lock" switch.

  2. Insert your plastic opening tool into the notch. Pry off the faceplate by gently sliding the plastic opening tool around the phone while still keeping the tool under the edge of the phone. When enough of the faceplate has been lifted it can be easily removed.
    • Insert your plastic opening tool into the notch.

    • Pry off the faceplate by gently sliding the plastic opening tool around the phone while still keeping the tool under the edge of the phone.

    • When enough of the faceplate has been lifted it can be easily removed.

    • In order to replace the faceplate, simply press and snap the faceplate back onto the front of the phone.

  3. Free shipping on all orders over $100.00 or containing a Pro Tech Toolkit!

    当社のショップを閲覧する
  4. Remove the four 2mm Phillips screws from the back housing of the phone.
    • Remove the four 2mm Phillips screws from the back housing of the phone.

  5. Insert the plastic opening tool in the notch at the top corner of the phone. Lift the corner and run the plastic opening tool around the phone until the back housing can easily be removed. Lift the corner and run the plastic opening tool around the phone until the back housing can easily be removed.
    • Insert the plastic opening tool in the notch at the top corner of the phone.

    • Lift the corner and run the plastic opening tool around the phone until the back housing can easily be removed.

  6. Remove the lends by pushing the lens from the inside of the housing. Remove the lends by pushing the lens from the inside of the housing.
    • Remove the lends by pushing the lens from the inside of the housing.

まとめ

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

kgkramer

メンバー登録日: 2012年06月27日

121 ポイント

2のガイドは作成済み

チーム

Cal Poly, Team 1-5, Regan SU 2012 Cal Poly, Team 1-5, Regan SU 2012人のメンバー

CPSU-REGAN-SU12S1G5

3 メンバー

10のガイドは作成済み

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 990