1. Pry up the small black piece of plastic located between the volume [-] button and the HOLD/ON button.
    • Pry up the small black piece of plastic located between the volume [-] button and the HOLD/ON button.

  2. Free shipping on all orders over $100.00 or containing a Pro Tech Toolkit!

    当社のショップを閲覧する

    Ever fixed something? That’s Genius.

    Share your repair story with #ImAGenius

    We Are All Geniuses

    Share your repair story with #ImAGenius

  3. Underneath the piece of plastic you just removed, there is a small screw (Phillips #000, 2.0 mm long).  Use a Phillips #000 screwdriver to remove it.
    • Underneath the piece of plastic you just removed, there is a small screw (Phillips #000, 2.0 mm long). Use a Phillips #000 screwdriver to remove it.

  4. Push on the backplate with both thumbs, sliding it towards the top of the device. Once it begins to move, lift up slightly.  You can then slide the backplate all the way off.
    • Push on the backplate with both thumbs, sliding it towards the top of the device.

    • Once it begins to move, lift up slightly. You can then slide the backplate all the way off.

まとめ

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

Andrew Groeneveld

メンバー登録日: 2014年02月24日

495 ポイント

4のガイドは作成済み

チーム

Michigan Tech, Team 5-3, Lauer Spring 2014 Michigan Tech, Team 5-3, Lauer Spring 2014人のメンバー

MTU-LAUER-S14S5G3

4 メンバー

6のガイドは作成済み

統計データを表示:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 4

今までの合計 435