メインコンテンツにスキップ

ビデオの概要

  1. Heat the back cover to melt the strong adhesive sticker underneath.
    • Heat the back cover to melt the strong adhesive sticker underneath.

  2. Try to pull and open a gap between back cover and  frame after heat. Insert into a guitar pick to cut the sticker.
    • Try to pull and open a gap between back cover and frame after heat. Insert into a guitar pick to cut the sticker.

  3. If you do it hardly, you need much more heat especially the edged side.
    • If you do it hardly, you need much more heat especially the edged side.

    • Slipping a playing card through the gap is a good way to loosen up the adhesive.

  4. Remove the back cover. The white stripe is the sticker.
    • Remove the back cover. The white stripe is the sticker.

終わりに

To reassemble your device, follow these instructions in reverse order.

44 の人々がこのガイドを完成させました。

Sophia

メンバー登録日: 2014年03月25日

43,362 ポイント

62のガイドは作成済み

9 件のコメント

What about putting the one back on?

rcf917 - 返信

will it go back on and stay on without new adhesive?

dfasdfjiun - 返信

I suggest that you take new adhesive, old adhesive is not strong enough to hold back cover.

Witrigs -

You can check this video of put it back battery cover : https://www.youtube.com/watch?v=3HrmeVGY...

Witrigs - 返信

How do I remove the sticky part

Marcelino Lopez - 返信

コメントを追加

統計データを表示:

過去 24時間: 0

過去 7 日: 15

過去 30 日: 80

今までの合計 106,829