Insert the plastic opening tool or a fingernail in the gap between the rear case and the base of the phone.
  • Insert the plastic opening tool or a fingernail in the gap between the rear case and the base of the phone.

コメントを追加する

Slide the plastic opening tool along the edge of the rear case. Lift the case gently from the base.
  • Slide the plastic opening tool along the edge of the rear case.

  • Lift the case gently from the base.

Why... is it not simple enough already lol

Adam Ahmed - 返信

Insert the plastic opening tool into the small gap between the battery and the phone base. Lift the battery out of its placeholder.
  • Insert the plastic opening tool into the small gap between the battery and the phone base.

  • Lift the battery out of its placeholder.

コメントを追加する

Place your fingernail in the groove of the stylus pen.
  • Place your fingernail in the groove of the stylus pen.

  • Pull the stylus pen away from the phone.

コメントを追加する

Remove the twelve 4mm Phillips #00 screws from the back chassis.
  • Remove the twelve 4mm Phillips #00 screws from the back chassis.

コメントを追加する

Insert the plastic opening tool into the Stylus Pen placement holder.
  • Insert the plastic opening tool into the Stylus Pen placement holder.

  • Lift the plastic opening tool so that the midframe separates from the base.

コメントを追加する

Remove the single screw beside headphone jack. Remove the single screw beside headphone jack.
  • Remove the single screw beside headphone jack.

You can skip this step, it is usseles as this screw doesn’t attach the mother board at all

Oriol Felisart - 返信

Use tweezers to remove both antenna clips. Use a spudger to disconnect six cable connectors.
  • Use tweezers to remove both antenna clips.

  • Use a spudger to disconnect six cable connectors.

コメントを追加する

Pull up on the motherboard with tweezers.
  • Pull up on the motherboard with tweezers.

Can i change at&t board to 9002 or 9005??,

Ayyaz - 返信

My mother board is not working what should I do I can't use Bluetooth, WiFi,hotspot or insert sim

soha Javed - 返信

My wifi hotspot is not working

Kiran Thopate - 返信

まとめ

To reassemble your device, follow these instructions in reverse order.

65 の人々がこのガイドを完成させました。

Brittany Gail

メンバー登録日: 2014年09月23日

7,891 ポイント

26のガイドは作成済み

チーム

USF Tampa, Team 2-2, Blackwell Fall 2014 USF Tampa, Team 2-2, Blackwell Fall 2014人のメンバー

USFT-BLACKWELL-F14S2G2

4 メンバー

26のガイドは作成済み

I'm looking for the screws for this phone, but all the search hits I've come across are for the screwdriver. Any leads on where I can find the screws?

Jared Lunt - 返信

I can replace motherboard sm-n9005 with motherboard sm-n900

yacine - 返信

I want to replace motherboard of galaxy note 3 SM-N900 with SM-N9005. Is it possible and can it convert 3g to 4G. Because my phone doesn't support 4G .it is 3g and I want to make it 4G .what should I do help me

Nippy Preet -

コメントを追加する

統計データを表示:

過去 24時間: 17

過去 7 日: 120

過去 30 日: 552

今までの合計 40,919