はじめに

Follow these easy steps to replace your old waste toner container. When waste toner container needs to be replaced a smart panel program window should appear on your computer.

Turn the printer off and wait a few minutes for it to cool.
  • Turn the printer off and wait a few minutes for it to cool.

コメントを追加する

Open the front cover. Open the front cover.
  • Open the front cover.

コメントを追加する

Pull the waste toner container out of the printer using the handle.
  • Pull the waste toner container out of the printer using the handle.

  • Make sure to keep waste toner container upright to avoid spillage.

コメントを追加する

Use the provided green cap to close the waste container opening on the top back of the container.
  • Use the provided green cap to close the waste container opening on the top back of the container.

  • Push new container firmly into place.

  • Firmly close front cover.

  • Turn printer on.

  • It may take up to 3 minutes for printer to resume function.

  • If you hear a crackling sound once the printer turns on the imaging unit is not installed correctly. Take out and reinsert the unit.

コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

Heather Howard

メンバー登録日: 2014年10月15日

439 ポイント

4のガイドは作成済み

チーム

University of Maine, Team 1-1, Diaz Fall 2014 University of Maine, Team 1-1, Diaz Fall 2014人のメンバー

UMAINE-DIAZ-F14S1G1

3 メンバー

4のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 7

過去 7 日: 39

過去 30 日: 154

今までの合計 3,191